Manual.ly Logo

Edifier M601DB Toriatsukai-Setsumeisho

0.0 · 0 評価

PDFマニュアル · 90 ページ

日本語

M: QW-35-FL
ページ

/ 90

Loading...
f884c82b82e50f03c77a6b726dc3b075855d page 2
1
English
Important safety instruction
1. Please read the instructions carefully. Keep it in safe place for future reference.
2. Use only accessories approved by the manufacturer.
3. Install the instrument properly by following the instructions in the device connection section.
4. Using the product in a 0-35℃ environment is recommended.
5. To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
6. Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing.
7. Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).
8. Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product.
9.
Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric shock.
10. Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended).
11. Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and is oriented to the right direction.
12. Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake.
13.
Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless the cause
o
f damage (such as damaged wire
or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be
performed by an authorized service professional immediately.
14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first.
15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module.
The module is limited to installation in mobile application;
A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations.
There is requirement that the grantee provide guidance to the host manufacturer for compliance with Part 15B requirements.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications do not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module
is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC ID: 2ABA2ATM200” any
similar wording that expresses the same meaning may be used.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum
distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The module is limited to OEM installation ONLY.
The statements for 5.8G module:

AIを使用して Edifier M601DB のマニュアルとチャットする

Edifier M601DB のマニュアルからAIによる即時回答を取得

Edifier M601DBに関する質問なら何でもどうぞ。回答はこのマニュアルから提供され、根拠となるページも表示されます。

M601DB メンテナンススケジュール

必要に応じて
製品表面の清掃

製品の電源を切り、プラグを抜いてください。乾いた布または中性洗剤と水のみを使用してください。強酸、アルカリ、ガソリン、アルコールは使用しないでください。

マニュアルに表示 (2ページ)
長期保管前
リモコンの電池を取り出す

リモコンを長期間使用しない場合は、液漏れや破損を防ぐためにCR2032電池を取り出してください。

マニュアルに表示 (7ページ)
M: qwen/qwen3.8-flash

質問を<\/span>する<\/span><\/span>

0/1000

M601DB をおすすめしますか?

はい いいえ

よくある 質問

A

システムは 220ワットのピーク電力と 110ワットの RMS 電力を提供し、衛星スピーカーあたり 20ワット、サブウーファーに 70ワットとして配分されます。

この回答は役に立ちましたか?

A

はい、デジタルオーディオのために光または同軸入力を使用して TV を接続するか、アナログケーブルで AUX/ラインインポートを使用できます。

この回答は役に立ちましたか?

A

いいえ、同軸ケーブルは箱に含まれていません。同軸入力モードを使用するには、別途購入する必要があります。

この回答は役に立ちましたか?

A

両方のユニットに電源を入れます。自動的に接続しない場合、サブウーファーの背面にあるペアボタンを光が高速点滅するまで押し、次にアクティブスピーカーのペアボタンを光が点灯し続けるまで押します。

この回答は役に立ちましたか?

A

効果的な Bluetooth 送信範囲は、顕著な障害物や干渉がない場合、約 10メートルです。

この回答は役に立ちましたか?

A

はい、アクティブスピーカーには専用の Bass Adjustment ノブがあり、サブウーファー出力を増減できます。

この回答は役に立ちましたか?

M: QW-35-FL

利点 および 欠点

利点

  • 110W RMS で大音量かつ明瞭なオーディオを提供する高出力出力
  • Bluetooth、光、同軸を含む多様な接続オプション
  • 低周波数応答をカスタマイズするための専用ベース調整ノブ
  • ファイバーオプティックおよび RCA ケーブルなどの包括的なアクセサリーを含む
VS

短所

  • サポートされている入力であるにもかかわらず、同軸ケーブルは箱に含まれていない
  • Bluetooth 範囲は実際には約 10メートルに制限されている
  • 信号が失われた場合、サブウーファーのペアリングには手動再接続が必要になる可能性がある
  • 屋内専用分類のため屋外使用には適していない
M: QW-35-FL

製品 仕様

種類

スピーカーシステム

チャンネル数

2.1

出力

110W RMS

周波数範囲

50Hz-20kHz

HDR

なし

オーディオ接続

デジタルオーディオ入力 (同軸) 1本、デジタルオーディオ入力 (光) 1本、ステレオリニア入力 (RCA) 1本、AUX入力 (3.5mmジャック) 1本

ワイヤレス

Bluetooth 5.1、aptX

色

ブラック

構成

ワイヤレスサブウーファー 1個、コンパクトスピーカー 2個

M: QW-35-FL

製品 説明

Edifier M601DB マルチメディアスピーカーシステムの発見

Edifier M601DB は、多様性を犠牲にすることなく高忠実度サウンドを要求する人のために設計されたオーディオ工学の頂点を表しています。この強力なマルチメディアスピーカーシステムは、アクティブ衛星スピーカーとサブウーファー間で分割された 110ワットの頑丈な RMS 出力を持つ 220ワットの印象的な総ピーク電力を提供します。周波数応答は、サブウーファーからの深くて共鳴する低音が 50Hz から 170Hz の範囲で、衛星が 140Hz から 20kHz までの中高音域を明瞭に処理するように慎重に調整されています。

接続は M601DB の体験の中心です。ユーザーは Bluetooth 5.0、光 (Toslink)、同軸、AUX、ラインインを含む複数の入力ソースの間で容易に切り替えることができます。Bluetooth 接続により、スマートフォン、タブレット、またはラップトップから信頼性の高い 10メートルの範囲内でワイヤレスストリーミングが可能になります。ホームシアター愛好家にとって、光および同軸入力はテレビ、ゲームコンソール、またはセットトップボックスへの直接デジタル接続を可能にし、低遅延オーディオ伝送を保証します。

システムは、ボリューム調整、モード切り替え、再生コントロールを簡素化する専用リモートコントロールを備えた洗練されたデザインを特徴としています。アクティブスピーカー上のユニークな bass アジャストメントノブにより、ユーザーは部屋の音響や個人の好みに合わせてローエンド応答を微調整できます。安全性機能は、0から 35度の摂氏環境での長期的な信頼性を確保するために、湿気、過熱、電気的危険に対する保護を含めて統合されています。

映画を見たり、ゲームをしたり、音楽を聴いたりするかどうかにかかわらず、Edifier M601DB は没入型の聴覚体験を提供します。パッケージには、RCA、ファイバーオプティック、電源コードなどの必要なケーブルと、ステレオセットアップの拡大のためのパッシブスピーカーオプションが含まれています。リモートのバッテリー取り扱いに関する安全ガイドラインと最適なパフォーマンスを維持するための適切な換気を常に守ってください。

M: QW-35-FL

© Copyright 2026 Manual.ly